iPad Not Charging – Try These Fixes

An iPad can stop charging for many different reasons. While most users respond to this problem by heading to the nearest Apple store, some issues can be fixed without professional help. However, you have to identify why your iPad is not charging, which can be challenging.

iPad Not Charging - Try These Fixes

Luckily, this article will help you to identify the most common causes of your iPad charging issue and how to solve them.

iPad Not Charging

The most likely causes why your iPad is not charging are problems with the charger or software problems.

Charger Problems

An issue with your charging adaptor would be one of the most common causes of your “iPad Not Charging” problem. Charging issues can stem from a short circuit, poor quality, or something as simple as dirt stuck on the end of the charger.

Solutions

Use an Original Charger

First, make sure you’re using an original iPad charger. If you bought a used iPad or ordered a new iPad charger online, there’s a good possibility it’s not an original. Try checking where your iPad charger was manufactured, and look for any typos on the charger label. They’re both the simplest methods to ensure its genuineness.

If you’re not sure if your charger is an original, the next step is to see if the charging problem is resolved when you use an original iPad charger. You can ask an authorized Apple vendor to lend you a charger for a few moments.

Check Power Requirements

If the charger is in good working order and you verified its quality, it’s time to check its power requirements. It will be useless if the input is from a port that produces low charge output. You should also ensure that the input is spike protected since an uneven power supply might cause the iPad to stop charging.

Various countries around the world use different power voltages and amperages. If you purchased your iPad from an overseas reseller, be sure you get a charger that meets your country’s power requirements.

When you don’t have an iPad charger, you must sometimes rely on other USB chargers or computers to recharge your iPad. Make sure to choose a USB 2.0 or higher version to guarantee a proper charge and avoid trouble. Also, you can’t and shouldn’t use an iPhone charger to charge an iPad since the latter demands higher voltage and amperage.

Check the Cable

The risk of accumulating dust or other particles on the head of your lightning cable over time might cause a block between your iPad and charger. Try using a non-aqueous substance like ethanol or acetone to remove the debris, then dry it, to solve the charging problem.

Cleaning the charging port of an iPhone, iPad, or iPod using an anti-static brush is always recommended. However, using an electrically conductive object to clean an iPad may cause harm to its internal components. Anti-static brushes are preferred since they do not conduct electricity.

Most people do not have an anti-static brush on hand, but a new toothbrush works just as well. Brush out any debris in the port using a soft brush, then try charging your iPad again.

Never attempt to twist your wire in a direction that it is not typically bent in. While packing away the charger, you should loop the charging cord in circles and place it somewhere where it is protected from external factors like humidity and heat. Also, try to avoid unnecessary bending or straining when storing your cable.

If the last two options don’t help, you can try a new cable instead. If replacing the cable resolves the problem, you should purchase a new Apple-certified cable, some of which have braided and unbreakable components.

Additionally, we want to stress the importance of utilizing MFi-certified Lightning cords. Cables that aren’t MFi-certified mean they don’t meet Apple’s high-quality Lightning connector requirements. Because these cables are of poor quality, they might overheat and harm your iPad’s internal components.

Software Issues

The iPad not charging issue can be caused by a software glitch, which could be created by an outdated operating system or a newly installed third-party application.

Solutions

Restart Your iPad

Another tried-and-true method that may often resolve the charging issue is a simple reboot.

You can restart your iPad by following these steps:

  1. Press and hold the On/Off button on the top of the device.
  2. A “Slide to Power Off” option will be displayed on your screen. To turn off your iPad, swipe in the right direction.
  3. While you’re at it, try charging your iPad while it’s entirely switched off.

Doing a hard reset on your iPad is also an option, but you will wipe all the applications, settings, and data.

There are two ways of doing a hard reset. The first requires you to do the following:

  1. Navigate to “Settings.”
  2. Select “General.”
  3. Under “Reset, “choose “Erase All Content and Settings.”

The second option is to switch off your iPad and reset it by simultaneously pressing and holding the Power On/Off and Home buttons.

You also have the option of only restarting your settings. This technique is less time-consuming and saves your valuable games, applications, data, and documents by just resetting the settings, but it still fixes the charging problem.

  1. Go to “Settings.”
  2. Tap on “General”
  3. Select “Reset all Settings” on your iPad to reset its settings.

You’ve eliminated the chance of a small software crash, a problem with your charger or charging cord, and a dusty or blocked charging port; there is one more restart you can do.

A DFU restoration wipes your iPad’s code and resets it to factory defaults. Moreover, a DFU restore can resolve a severe software issue and could be the cause of your iPad’s inability to charge. Remember to make a backup of your iPad since you’ll lose your images, contacts, videos, and other things if you don’t. If you’ve never done one before, it’s a good idea to follow an instructional video while doing a DFU restore.

Check the Operating Temperature

iPads are meant to work in temperatures ranging from 32 to 95 degrees Fahrenheit. Your iPad may stop functioning properly if it becomes too hot or cold. For example, the display on your iPad may go black, and charging may slow down or stop entirely.

Return your iPad to normal working temperatures by placing it in an environment within the optimal temperature range. Avoid exposing your iPad to direct sunlight, and charge your iPad again after it has returned to average working temperatures.

If Nothing Works, Apple Is There to Help

Sadly, the methods listed will not solve every iPad charging issue. Some issues will require you to get your iPad serviced.

Among the most frequent cause of iPad charging issues is that it has been a victim of water or other liquid. That liquid has the potential to harm the connections within your iPad’s charging port irreversibly.

Have you ever experienced a similar issue? Have you managed to fix it? Let us know in the comment section below!

Leave a Reply

Your email address will not be published. Required fields are marked *


Disclaimer: Some pages on this site may include an affiliate link. This does not effect our editorial in any way.

Todays Highlights
How to See Google Search History
how to download photos from google photos